Sony T310 - Manual (Page 20)

This is the Internet version of the user's guide. © Print only for private use.
20 Personalizing your phone
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a personal
ring signal to numerous callers.
To set a specific ring signal for a caller
1. Scroll to Phone book, YES , Personal rings, YES ,
Add new?, YES .
2. Enter the first letter of the contact name, YES .
3. Select a contact, YES .
4. Select a ring signal, YES .
Sounds & alerts
You can choose to be notified of an incoming call
by the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off
or when you have set the phone to silent.
• Off – all the time.
To set the vibrating alert
1. Scroll to Settings, YES , Sounds & alerts, YES ,
Vibrating alert, YES .
2. Select the setting you want, YES .
From Settings/Sounds & alerts, you can also select:
• Message alert when messages are received.
• Key sound when using the keypad.
• Minute minder to beep after every minute during calls.
Menu language
Most SIM cards automatically set the menu language
to the language of the country where you bought your
SIM card. If this is not the case, the preset language is
English.
To change the menu language
1. Scroll to Settings, YES , Language, YES , Menus, YES .
2. Select a language, YES .
Note: You can always choose Automatic by pressing
8888 in standby.
You can always choose English by pressing
0000 in standby.
Display light
The display light can be set to automatic, off or on.
In automatic mode, the display light is turned off a few
seconds after you press the last key.