Sony T310 - Manual (Page 60)

This is the Internet version of the user's guide. © Print only for private use.
60 Using WAP
To select a WAP profile
1. Scroll to WAP services, YES , Select profile, YES .
2. Select the profile you want to use, YES .
You then return to the WAP services menu and the
WAP profile is selected.
Using the WAP browser
To start browsing
• Scroll to WAP services, YES , select a service from the
following:
• Open your homepage at the top of the list, for
example, Sony Ericsson.
• Go to one of your bookmarks. Select Bookmarks,
YES .
• Enter the address of a WAP site. Select Enter
address, YES , New address? to enter a new WAP
address or select one of the 10 latest entered
addresses.
Tip: When you enter a WAP address, the normal
http:// prefix is not needed.
To exit WAP and disconnect
• Press and hold NO or
• Press , select Exit WAP.
Options when browsing
When you have started browsing, you can reach
different browsing options by pressing
.
The options menu is dynamic. Its content may vary
depending on which WAP site you are visiting.
The options menu always contains the following:
• Go to the homepage set for the current WAP profile.
• Bookmarks – Add the site you are currently browsing
to your list of bookmarks, or see the list of bookmarks
for the current profile.
• Enter address – Enter the WAP address of a site you
want to visit.
• Save picture – Save a picture from the site.
• Send via SMS – Send a text message with a link to the
current WAP page to another phone.
• Send link – Send a link to the current site to another
phone via infrared.
• Reload – Refresh the contents of the WAP page.
• Exit WAP – Disconnect and go to standby.
• Status – Display current status information, for
example, profile, access type, connection time, data
rate, security, address.
• Set as homepg – Set the current site as the homepage
of the WAP profile you are using.