Chapter 3— installation, Dimensions, Mounting – Schneider Electric POWERLOGIC PWRSRV750 User Manual
Page 9: Chapter 3—installation
Advertising
63230-216-207/A3
Chapter 3—Installation
9/2002
Dimensions
5
© 2002 Schneider Electric All Rights Reserved
CHAPTER 3—INSTALLATION
DIMENSIONS
Figure 3–1: Power Server dimensional drawing
MOUNTING
The Power Server is designed to be mounted directly on a 1.38 in (35 mm)
DIN rail. The unit has a snap-on DIN rail connector on the back (see
Figure 3–2). No tools are required. Mount the Power Server in a clean, dry,
well ventilated area. Allow 15.75 in (400 mm) on the DIN rail for mounting the
Power Server and power supply. Also, allow 3 in (76 mm) clearance above
the Power Server for heat ventilation.
Figure 3–2: Power Server rear view showing DIN rail connection
8.98 in
228 mm
5.63 in
143 mm
3.62 in
92 mm
30703
001
Rear view DIN rail
connector location
307
03002
Advertising
This manual is related to the following products: