SMC Networks Barricade SMC2804WBRP-G - Manual (Page 59)

Barricade g Wireless Router with USB Print Server Manual
A.4 | I can’t access my e-mail, web or I am getting corrupted data from the Internet.
The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set
at 1454.
For most DSL users, it is strongly recommended to use MTU 1492.
If you are having some difficulties, perform the following steps:
1. To connect to the Barricade g, launch your web browser, and enter http://192.168.2.1 or the
IP address of the Barricade in the Address bar.
2. Enter the password, if asked. (The default password is smcadmin.)
3. Click on [WAN] and then select the [PPPoE] option.
4. Look for the MTU option and in the MTU Size field, enter 1492.
5. Click the [SAVE SETTINGS] button to continue.
If your difficulties continue, change the Size to different values. Try this list of values, one value at
a time, in this order, until your problem is solved:
1462
1400
59