SMC Networks Barricade SMC2804WBRP-G - Manual (Page 6)

Barricade g Wireless Router with USB Print Server Manual
CHAPTER 3 | Getting Connected
The SMC2804WBRP-G Barricade g Router with USB Print Server is connected between the Ethernet
Broadband Modem and your computers, either wired or wireless. If you have more then one
computer to connect, simply plug the other computers into the LAN ports on the back of the router
or connect via a wireless signal.
MODEM
connected
o WAN Port t
COMPUTER
connected to
LAN Port
3.1 | Basic Installation Procedure
1. CONNECT the WAN
Connect an Ethernet cable from your cable or DSL modem to the Barricade g WAN port on the
back on the router.
2. CONNECT the LAN
Run an Ethernet cable from one of the LAN ports on the back of the Barricade g to your
computer’s wired network adapter.
3. POWER on
Connect the power cable to the Barricade.
NOTE: It is highly recommended that you do you initial configuration from a wired connection.
Once you have completed connecting all of the hardware, simply insert the Barricade g CD-ROM
and the EZ 3-Click Installation Wizard will automatically get you connected you to the Internet.
For manual configuration of the PCs, see Chapter 4.
For advanced configuration of the Barricade Broadband Router, see Chapter 5.
6