Status leds, Status leds -3 – SMC Networks 1000 User Manual
Page 17
Advertising
A
BOUT
THE
T
IGER
S
WITCH
1000
1-3
Status LEDs
The LEDs, which are located on the front panel for easy viewing,
are shown below and described in the following table.
Figure 1-2. Port and System LEDs
Port and System Status LEDs
LED
Condition
Status
Power
On Green
Switch is receiving power.
Off
Power off or failure.
RPU
On Green
Redundant power unit is attached and
is operating in a load-sharing mode.
Off
Power off or failure.
Diag.
Flashing Green
System self-diagnostic test in progress.
On Green
System self-diagnostic test successfully
completed.
On Amber
System self-diagnostic test has failed.
Advertising