SCI Scandicrafts A2840/R - Manual (Page 13)

12
Ozone Function (use is optional)
Used for rapid odor removal and surface sterilization. Select this feature by pressing the
“FUNCTION” button until you see “OZONE” on the digital display.
Anion Function
This unit includes a negative ion generator. Negative ions literally sweep your breathing
space clean of many lung damaging pollutants by causing the floating particulates to cling
together, forming a mass which drops them to the floor to be swept up. Select this feature
by pressing the
“FUNCTION” button until you see “ANION” on the digital display.
UV/Ti02 (UV Bulb Sterilizer)
An advanced UV Bulb sterilizes the air that passes through the unit. You should allow this
feature to run continuously to achieve optimal fresh air output. Turn this feature on or off
by pressing the
“UV/Ti02” button until you see “UV: ON” or “UV: OFF” on the digital
display.
Fan Speed
This unit has a quiet 3-speed fan. Adjust the fan speed by pressing the
“SPEED” button.
The display will show 1 - 3 bars under “SPEED” on the display. The smallest bar
represents the lowest speed and the largest bar represents the highest speed.
Manual Mode
This mode will automatically set the function to Anion after operating for 2 hours. This
mode will only disable the Ozone function (not the fan speed or UV Bulb). Select this
feature by pressing the
“MODE” button until you see “MANU” on the digital display.
Auto Mode
This mode will operate the unit for 20 minutes at your desired settings, turn itself off for 40
minutes, and continue to repeat the same cycle until you stop the
“AUTO” mode. Select
this feature by pressing the “MODE” button until you see “AUTO” on the digital display.
2 Hours Mode
This mode will operate the unit at your desired settings and turn itself off automatically after
2 hours. Select this feature by pressing the
“MODE” button until you see “2HOURS” on
the digital display.
4 Hours Mode
This mode will operate the unit at your desired settings and turn itself off automatically after
4 hours. Select this feature by pressing the
“MODE” button until you see “4HOURS” on
the digital display.
ADVANCED FUNCTIONS
I-4506 BR7580R-1 6/25/07 7:57 AM Page 16