Features inspection & installation – SCI Scandicrafts A2840/R User Manual

Page 4

Advertising
background image

3

·

QUIET FIVE SPEED FAN

·

ADJUSTABLE 24-HOUR CLOCK

·

ADJUSTABLE POWER OFF TIMER

·

ADJUSTABLE PURIFIER CONTROL (USED FOR RAPID ODOR REMOVAL AND

SURFACE STERILIZATION)

·

ANION - NEGATIVE ION GENERATOR (NEGATIVE IONS CAUSE THE FLOATING

PARTICULATES TO CLING TOGETHER, FORMING A MASS WHICH DROPS

THEM TO THE FLOOR TO BE SWEPT UP)

·

STERILIZE (UVC LIGHT HELPS REDUCE AIRBORNE GERMS AS THEY PASS

THROUGH THE UNIT)

·

HELPS REDUCE SMOKE AND ODORS FROM YOUR HOME, OFFICE, CAR, BOAT,

RV, ETC...

·

REDUCES MOLD, MILDEW AND BACTERIA

·

REPLACEABLE UV LAMP

·

REMOTE CONTROL OR MANUAL OPERATION VIA FRONT PANEL CONTROLS

·

USER INTERFACE DISPLAY

·

MAINTENANCE REMINDERS

·

WASHABLE PURIFICATION PLATE

·

WASHABLE PHOTO-CATALYTIC PROCESS SCREEN

·

WASHABLE PRIMARY FILTER

·

SLEEP MODE (DISABLES MOST OF THE DISPLAY LIGHTS, BUT UNIT CONTINUES

TO OPERATE)

·

IMPROVES INDOOR AIR QUALITY

·

USES STANDARD HOUSEHOLD CURRENT

1. Remove unit from shipping carton.

2. Check for shipping damage and loose or broken parts.

3. Remove any protective materials from the outside of the unit.

4. Read Owner’s Manual thoroughly prior to operating or servicing the unit.

5. Insert the battery into the remote by sliding the battery compartment open and placing

the battery with the positive side (+) facing up.

6. Open the Primary Filter by removing the four corner screws and remove all protective

materials from the inside of the unit, i.e. tape used to hold the Catalytic Screen and/or

UV Lamp in place.

7. Make sure Catalytic Screen is secure. (Refer to: “GENERAL MAINTENANCE”, page 5)

8. Make sure the purification plate is secure and fully inserted in its slot. (Refer to: Page 6

Diagram B)

9. Reinstall the Primary Filter and any other temporarily removed parts before continuing.

10. Determine placement location for the unit. We recommend placing it up higher if

possible. A securely fastened wall shelf would be an ideal location.

11. Plug the unit into a 3 prong grounded circuit receptacle.

FEATURES

INSPECTION & INSTALLATION

I-4506 BR7580R-1 6/25/07 7:57 AM Page 7

Advertising