Spectrum Brands SPECTRUM PLUS SP-550 - Manual (Page 17)

120V AC Outlet Recovery Power Adapter (provided)
The 120 VOLT AC OUTLET RECOVERY POWER ADAPTER is an featured TeleMatrix
product. It provides both the telephone lines and the power source in one cable (6P6C line
cord) and is designed to recover the use of the power outlet.
16
Power Adapter “LINE” Connection
The power adapter “LINE” connection is used
to connect the telephone line from the wall
jack to the power adapter. Using one of the 15
foot modular telephone line cord, connect one
end of the cord to the RJ14 telephone jack on
the wall or base board. The remaining end of
the cord plugs into the “LINE” side of the
power adapter.
Power Adapter “PHONE” Connection
The power adapter “PHONE” connection is
used to provide both the telephone lines and
the power source to the telephone. Using one
of the 15 foot modular telephone line cord,
plug one end of the line cord into the back of
the telephone. Plug the remaining end to the
power adapter jack labeled “PHONE”.
Connector Configuration
The 120V Outlet Recovery Power Adapter has two (2) modular jacks. One jack is labeled
“LINE” and the other jack is labeled “PHONE”. These jacks allow for a fully modular instal-
lation.
L2 L1+L2
N E L _
E H N O P
OUT
ORDER SEPERATELY