Spectrum Brands SPECTRUM PLUS SP-550 - Manual (Page 29)

Programming Pause Timing
(Administrator Programmable Only)
A Pause time between 2.0S to 5.0S can be programmed into memory at the option of the Ad-
ministrator. This function allows the Administrator to provide delay timing for systems re-
quiring different delay times and the user to delay the dialing pattern of a number. This function
may be required for accessing line features provided by telephone provider or local telephone
company. A speed dial number may need to pause during its dialing sequence to ensure proper
connections.
Pause timing can be programmed for different timing options listed below.
1. Press and hold the “STORE” key for 6 seconds to enter set up.
2. Press the “STORE” key multiple times until the LCD display reads “PAUSE TIME:3.6S”.
3. Enter the pause timing to be stored into memory using the keypad by pressing the following
keys on the keypad in the order shown. The keypad entry will be displayed on the LCD
Screen.
Four Examples:
For 2.0S press "2" "0" on the keypad.
For 2.1S press "2" "1" on the keypad.
For 3.2S press "3" "2" on the keypad.
For 4.9S press "4" "9" on the keypad.
4. Press the “STORE” key to enter the new pause timing value.
5. To exit the program mode, press “DISC” or continue to the end of programming by
pressing the “STORE” key multiple times until the display reads “All Setup OK”.
PAUSE TIME:3.6S
12/01
PM
12:00
PAUSE TIME x.xS Set up pause timing 1.0S to
5.0S. Default 3.6S.
28
NOTE: If you require a pause time delay longer than the maximum setting of 5.0S,
stack the pauses within the dialing pattern to achieve the longer timing.
!