SUPER MICRO Computer X7DVL-3 - Manual (Page 10)

1-4
X7DVL-3/X7DVL-i User's Manual
X7DVL-3/X7DVL-i Motherboard Layout
Notes:
1. Jumpers not indicated are for test purposes only.
2. See Chapter 2 for detailed information on jumpers, I/O ports and
JF1 front panel connections.
3. " " indicates the location of Pin 1.
4. When LE1 is on, make sure to unplug the power cable before removing or in-
stalling components.
5. SAS is available for the X7DVL-3 only. SAS Connectors, the LSI SAS HostRAID
Controller, the I-Button socket and 3-GSPIO0/3-GSPIO1 LEDs are built in on the
X7DVL-3 only. I-Button is used to enable RAID 5. However, RAID 0, 1 and 10 are
enabled through the LSI SAS Controller. (I-Button is optional.)
(not drawn to scale)