Socket Mobile SoMo 650 - Manual (Page 46)

S OCKET S CAN 10 I CONS
The icon indicates whether SocketScan 10 is connected to your CHS and
ready to read data. The icon appears at the bottom of the Today screen.
Icon Meaning
CHS not connected.
CHS connected and ready to scan barcodes
S
TEP
1: C
HARGE THE
CHS
Refer to your CHS manual for hardware preparation instructions. You may
also want to attach the tether.
If you have a 1D version of the CHS (7C, 7E, 7M, 7NRx or 7P) there are some
extra steps you need to perform:
Change the CHS to SPP mode. Power on the CHS. Print out this page and
scan the barcode below. Do not scan this barcode on your computer screen.
Use the Bluetooth software to start a device search and pair with the CHS.
• Press the right side application button, which by default launches the
wireless manager.
• If Bluetooth is not enabled, tap on the Bluetooth button.
• Tap Options | Bluetooth Settings
• At the bottom of the screen, tap Add.
• In the list of found devices, select the CHS.
• Complete the remaining screens. If prompted for a passkey, enter 0000
(four zeroes).
• After pairing, tap on the COM Ports tab. Add an outgoing COM port for
the CHS.
S
TEP
2: I
NSTALL
S
OCKET
S
CAN
10
1. In the Today screen, tap Getting Started.
2. In the list of Getting Started wizards, tap Set up SocketScan 10.
3. Tap the link to install the software.
46