Sony RDR-HX750 - Manual (Page 22)

22
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
The remote performs the following:
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV
mode and DVD mode. Press the TV/DVD
button when in stop mode or no menu appears
on the TV screen. Point your remote at the
recorder when using this button.
TV mode: switch to this when you use the
TV’s tuner mainly. When you start playback,
the input source for the TV is set to the
recorder automatically.
DVD mode: switch to this when you use the
recorder’s tuner mainly.
To check the current mode, press DISPLAY
(page 35).
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
you have completed “Step 6: Easy Setup.”
The default command mode setting for this
recorder and the supplied remote is DVD3.
You can check the current Command Mode
in the front panel display. For details, see
page 126.
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Manufacturer Code number
Sony 01 (default)
Hitachi 24
JVC 33
Panasonic 17, 49
Philips 06, 08
Samsung 71
Sanyo 25
Thomson 43
Toshiba 38
Buttons Operations
TV [/1 Turns your TV on or
off.
TV 2 (volume)
+/– Adjusts the volume
of your TV.
TV PROG +/– Selects the
programme position
on your TV.
TV t (input
select) Switches your TV’s
input source.
If you have a Sony DVD player
or more than one Sony DVD
recorder
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
Changing programme positions
of the recorder using the
remote
ENTER
Number
buttons