Sony RDR-HX750 - Manual (Page 86)

86
Dubbing an Entire DV
Format Tape (DV One
Touch Dubbing)
You can record the entire contents of a DV/
Digital8 format tape onto a disc with a single
press of the ONE-TOUCH DUB button on
the recorder. The recorder controls the digital
video camera for the whole process, and
completes the recording.
Follow steps 1 to 5 of “Preparing for DV
camcorder dubbing” on page 84, and
press ONE-TOUCH DUB on the recorder.
The recorder rewinds the tape and then starts
recording the tape contents.
After the recording is finished, the recorder
rewinds the tape in the digital video camera,
and finalises the recorded disc (except DVD-
RW/DVD-R (VR mode)) automatically.
To stop during recording
Press x REC STOP more than 3 seconds.
Note that it may take a few seconds for the
recorder to stop recording.
z Hint
You can also start DV One Touch Dubbing by
selecting “One-Touch Dubbing” of “DV” in the
System Menu.
b Notes
• When a blank space between the recordings on
the tape continues for more than two minutes, DV
One Touch Dubbing ends automatically.
• The recorder will pause recording when there is a
blank space or an image containing copy
protection signals on the tape. The recorder will
resume recording automatically when receiving a
recordable signal.
• Finalisation is cancelled if a timer recording starts
(except for DVD-RW/DVD-R (VR mode)).
• DV One Touch Dubbing ends automatically
when there are images containing copy protection
signals at the beginning of the tape.
Dubbing Selected
Scenes (Manual
Dubbing)
You can select and dub scenes while playing
a DV/Digital8 format tape.
1
Follow steps 1 to 5 of “Preparing for
DV camcorder dubbing” on page 84.
2
Press SYSTEM MENU.
The System Menu appears.
3
Select “DV,” and press ENTER.
4
Select “Manual Dubbing,” and press
ENTER.
5
Select the recording destination,
“Record to Hard Disk Drive” or
“Record to DVD,” and press ENTER.
6
Press H.
The scene starts to play.
7
Find the point on the DV/Digital8
format tape that you want to start
dubbing from using m/M or c/
C
, and press X.
8
Select “Start Rec.,” and press ENTER.
The recorder starts dubbing.
9
Select “Pause Rec,” and press
ENTER.
The recorder pauses dubbing.
10
Repeat steps 6 to 9 to dub more
scenes.
11
Select “Stop Rec,” and press ENTER.
The selected scenes are dubbed as a
single title.
To cancel during “Manual Dubbing”
Press SYSTEM MENU.
+ RW -RW VR -RW
Video
-R VR
+ R HDD
-R
Video
+ RW -RW VR -RW
Video
-R VR
+ R HDD
-R
Video