Sharp O2 - Manual (Page 51)

Fun & Games 50
* The default setting tone.
To create your original tone, see “Creating Your Original
Tone” on page 54.
Setting the Strength of the Original Ringing Tone
The strength of the original ringing tone can be set in 3
levels for each melody.
When you purchase this phone, the strength of the
original ringing tone is set to “forte (Loud)”.
1. Perform steps 1 to 13 in “Creating Your Original
Ringing Tone” on page 45.
2. Press or to select “Strength Set”, then press
.
3. Select a strength of the tone by pressing or ,
then press .
When “Play Current Chord” is selected, the original
ringing tone entered is played back in the selected
strength of the tone.
4. Select “OK”, then press .
Now you can create an original ringing tone.
Deleting an Original Ringing Tone
Perform steps 1 to 4 in“Deleting Sounds” on page 41.
Editing Original Ringing Tones
1. Perform steps 1 to 3 in “Creating Your Original
Ringing Tone” on page 45.
2. Press or to select “Existing Melodies”, then
press .
Percus-
sions
Tinkle Bell
Agogo
Steel Drums
Woodblock
Taiko Drums
Melodic Tom
Synth Drum
Reverse Cymbal
Effects
Gtr. Fret Noise
Breath Noise
Seashore
Bird Tweet
Telephone Ring
Helicopter
Applause
Gunshot
Original
Original 1 (Piano)*
Original 2 (Glockenspiel)*
Original 3 (Reed Organ)*
Original 4 (Nylon Guitar)*
Original 5 (Violin)*
Category Tone Category Tone