Sharp O2 - Manual (Page 73)

Call Manager 72
Call Costs (M 6-2-6)
This function lets you check the charges for your calls.
Charging Advice is not supported on all networks.
Please check with your service provider for availability.
Checking the Cost of the Last Call
1. Press
to display the Main Menu.
2. Press or to select “Call Manager”, then press
.
3. Press or to select “Call Register”, then press
.
4. Press or to select “Call Costs”, then press
.
5. Select “Last Call”, then press .
The cost of the last call is now displayed.
6. When you have finished, press [Back] to
return to call timers menu.
Checking the Total Call Cost
1. Press
or to select “All Calls”, then press
in step 5 in “Checking the Cost of the Last Call”.
2. When you have finished, press [Back].
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call”.
2. Press or to select “Cost Units”, then press
.
3. Press or to select “Set Units”, then press
.
4. Enter your PIN2 code, then press .
5. Enter a cost per unit, then press .
To enter a decimal point, press .
6. Enter a currency unit (up to 3 characters), then press
.
Checking the Charge Rate
1. Select “Read Units”, then press
at step 3 in
“Setting the Charge Rate”.
The charge rate is now displayed.
2. When you have finished, press [Back].