Silvercrest KH6500-06/08-V1 - Manual (Page 16)

- 14 -
LAST MEMORY
• Select the setting ON to playback a disc from
the previous halted position after removal and
re-insertion.
• with the setting OFF disc playback starts from
the beginning.
Note:
When the DVD player is switched off the
saved position is not retained.
8.2 DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT
Select the input DIGITAL OUTPUT to set the SPDIF
audio output signal.
OFF:
Select OFF when there is to be
no digital signal output.
PCM: Select PCM (Pulse Code Modu-
lation) when a connection to a
digital amplifier/receiver exists.
Your DVD player transmits,
through the PCM signal, the
same audio formats that are ren-
dered on the disc. In addition
there will be an audio signal out-
put via the left/right connection.
RAW: The DVD player outputs the raw
data of the Dolby Digital sound
(default setting).
* * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * *
SETUP SPDIF SETUP SPDIF SETUP SPDIF
OFF OFF OFF
RAW
RAW RAW
PCM
PCM PCM
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT
LPCM OUTPUT
LPCM OUTPUT LPCM OUTPUT
RAW RAW RAW
48 K
48 K 48 K
SET LAST MEMORY STATE SET LAST MEMORY STATE SET LAST MEMORY STATE
ON ON ON
OFF
OFF OFF
* * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * *
TV DISPLAY TV DISPLAY TV DISPLAY
ANGLE MARK
ANGLE MARK ANGLE MARK
OSD LANGUAGE
OSD LANGUAGE OSD LANGUAGE
CLOSED CAPTIONS
CLOSED CAPTIONS CLOSED CAPTIONS
SCREEN SAVER
SCREEN SAVER SCREEN SAVER
LAST MEMORY
LAST MEMORY LAST MEMORY
WIDE WIDE WIDE
OFF
OFF OFF
ENG
ENG ENG
OFF
OFF OFF
ON
ON ON
OFF
OFF OFF
Select the input LPCM OUTPUT to set the sampling
frequency for the processing of the raw data.
48 K: Default
setting.
96 K: Only for DVDs with the corre-
sponding sampling frequency.
Note:
The LPCM OUTPUT function is only available if you
have set the SPDIF audio output signal to PCM.
DOLBY DIGITAL SETUP
• Select the input DUAL MONO to set the Dolby
Digital output either to STEREO, L-MONO,
R-MONO or MIX-MONO .
• Select the input DYNAMIC to enable an optimal
sound replay with reduced volume.
• In the setting FULL the louder passages will be
surpressed and the softer passages will be play-
ed back louder.
Note:
This function is only possible when using a
digital audio component.
DYN. COMPR. OFF DYN. COMPR. OFF DYN. COMPR. OFF
DUAL MONO DUAL MONO DUAL MONO
DYNAMIC
DYNAMIC DYNAMIC
STR STR STR FULL
3/4
1/2
1/4
OFF
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
MIX - MONO MIX - MONO MIX - MONO
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP
STEREO STEREO STEREO
L-MONO
L-MONO L-MONO
R-MONO
R-MONO R-MONO
DUAL MONO DUAL MONO DUAL MONO
DYNAMIC
DYNAMIC DYNAMIC
STR STR STR
* * * * * * DIGITAL AUDIO SETUP PAGE DIGITAL AUDIO SETUP PAGE DIGITAL AUDIO SETUP PAGE * * * * * *
SETUP LPCM SETUP LPCM SETUP LPCM
48 K 48 K 48 K
96 K
96 K 96 K
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT
LPCM OUTPUT
LPCM OUTPUT LPCM OUTPUT
PCM PCM PCM
48 K
48 K 48 K
IB_KH6500_AR23388_LB6 01.08.2008 11:47 Uhr Seite 14