Siemens Electrical Lean Switch - Manual (Page 69)

Diagnostics over Industrial Ethernet
Industrial Ethernet
A5E00152007-03
69
6.3.10 Event Configuration
Clicking the Event Config menu opens the window shown in Figure 6-16. Here,
you can set link up/down and cold restart events for E-mail and/or trap recipients.
Figure 6-16 Event Configuration Window
Select, for example, the first box to monitor link up/down events at Port 1 using E-
mail. If there is a change in the port status, an E-mail is sent to the recipient
specified in the E-mail configuration menu.
● Get Current Values/Set New Values
If you click the "Get Current Values" button, you obtain the values currently
stored on the ELS. To save the entries made in this window, click the "Set New
Values" button.