Sony PCWA-C100 - Manual (Page 44)

44
The following describes how to set up software for
building a wireless LAN environment with the Access
Point. Follow the steps below.
1
Use the Wireless Palette software to register the
Access Point to every computer you want to
connect in a wireless LAN.
2
Use the Basic Setup Utility to set up the Access
Point on one of the wireless LAN computers.
To establish communication with the
Access Point
On every computer you want to connect to the
wireless LAN, use the Wireless Palette to establish
communication with the Access Point.
Before attempting to establish a wireless LAN
environment:
• Check the six-digit Access Point ID on the bottom
surface of the Access Point.
• Install and connect the Access Point. (Refer to the
Access Point Operation Instructions manual.)
• Insert the Wireless LAN PC Card to the computer.
1
Double-click the on the task tray.
The Wireless Palette status window appears.
Setting up the connection
environment
Wireless LAN connection
z Tip
If the icon is not on the
tray, select VAIO -
Wireless LAN - Wireless
Palette from the Start
menu.
Access Point ID
Factory-set Encryption KEY