Sony PCWA-C100 - Manual (Page 6)

6
Task flow
To build a wireless LAN environment, you must configure both the
Access Point and the Wireless LAN PC Card.
Required tasks depend on the state of your Access Point and Wireless
LAN PC Card. The table below lists their states and tasks required for
building a wireless LAN environment.
1. Connect the Access
Point. (*1)
2. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows
environment and
install software. (*2)
3. Register the Access
Point using the
Wireless Palette. (*3)
4. Configure the Access
Point using the Basic
Setup Utility. (*4)
1. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows
environment and
install software. (*2)
2. Register the Access
Point using the
Wireless Palette. (*3)
1. Connect the Access
Point. (*1)
2. Register the Access
Point using the
Wireless Palette. (*3)
3. Configure the Access
Point using the Basic
Setup Utility. (*4)
• To communicate with
an Access Point
previously used in
another wireless LAN
environment from a
computer containing
the Wireless LAN PC
Card.
1. Register the Access
Point using the
Wireless Palette. (*4)
Access
Point
New
In use
Wireless LAN PC Card
New In use
*1 See Connections in the Access Point Operating Instructions manual.
*2 See Inserting the Wireless LAN PC Card and succeeding sections in this
manual.
*3 See To establish communication with the Access Point and succeeding
sections in this manual. For further information, see the Wireless Palette Help
files.
*4 See Setting up the Access Point and succeeding sections in this manual.