Sony PCWA-C100 - Manual (Page 45)

45
2
Click the Tool Box button .
The Tool Box window appears.
3
Click Add.
The Add New Access Point dialog box appears.
4
Specify the Nickname, Access Point ID, and
Encryption Key.
The Nickname identifies the Access Point. Enter
up to eight alphanumeric characters for Nickname.
If multiple Access Points exist, make sure to assign
a unique name to each one.
For Access Point ID and Encryption Key, enter the
six digit Access Point ID from the bottom of the
Access Point. The factory-set Encryption Key are
the last five digit of the Access Point ID.
z Tips
• If the Access Point is
already installed, your
network administrator
may have changed the
Encryption Key using
the Basic Setup Utility
or the Custom Setup
Utility. Contact your
network administrator
for instructions.
• If the Encryption Key is
specified, wireless
communications are
encrypted for
protection against
unauthorized
reception.
z Tip
Check Peer to Peer to
establish wireless
communications
between computers
without using the
Access Point. For more
information, see the
section, To establish a
wireless LAN
environment without
using the Access Point
on page 46.