Sony XCI-SX1 - Manual (Page 12)

XCI-SX1 SDK / SDK Technical Manual
-----------------------------------------------------------
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
usbcore
usb-ohci
hid
input
keybdev
mousedev
8139too
# For NFS
sunrpc
lockd
# Enable USB mass storage support (requires USB core support)
scsi_mod
sd_mod
usb-storage
# Enable FAT FS support
fat
vfat
nls_cp437
# FOR SMARTCAM DRIVER
videodevX
smartcam
skxflash
-----------------------------------------------------------
The order of the list is significant. So unless really required, never
change the order of list.
2.3.4 Network Configuration
The network setting should be configured during boot up process. To be
able to enable IP address acquisition through DHCP service, add the
following lines below to /etc/init.d/networking:
Note: It’s not configured by this file on NFS boot, but by the setting on
128MB CF.
10