Sony XCI-SX1 - Manual (Page 17)

XCI-SX1 SDK / SDK Technical Manual
Edit the /etc/ld.so.conf file and make sure the following lines exist
and run ‘ldconfig’ command afterwards:
• /lib
• /usr/local/lib
• /usr/X11R6/lib
• /usr/src/linux/lib
Make sure that the /dev/mouse node exists. If the said node does not
exist, invoke
mknod /dev/mouse c 13 63
Running ‘startx’ should be successful. To test if the mouse is
properly working on X11 environment, run ‘xev’ command.
Please note that the development environment has no copy of the
XFree86 source codes since it consumes a large amount of CF space.
2.5.1.2 XFree86 Locale Support
X11 is required to have support of locale settings. The following locale
environments should be added to the system:
• C
• ja
• ja_JP.UTF-8
• ja.SJIS
• en_US.UTF-8
• C.iso88591
The localedef command is required to create the locale environments.
The syntax for creating the environment is shown below:
localedef -i [locale] -f [charmap] [alias]
The table below shows the required values for each locale environment
to be supported. Please note that the C locale is the default locale
environment and does not need to be created.
Locale Requirements
Alias Locale Charmap
ja ja_JP.eucJP EUC-JP
ja_JP.UTF-8 ja_JP.UTF-8 UTF-8
ja.SJIS ja_JP.SJIS
SHIFT_JIS
en_US.UTF-8 en_US UTF-8
C.iso88591 en_US
ISO8859-1
15