Sony XCI-SX1 - Manual (Page 23)

XCI-SX1 SDK / SDK Technical Manual
# context model level match read write
notif
access smartcamROGroup "" any noauth exact all none
none
access smartcamRWGroup "" any noauth exact all all
none
###########################################################
# System contact information
#----------------------------------------------------------
sysdescr Sony Smart Camera
###########################################################
# Trap destination
#----------------------------------------------------------
trapcommunity public
trap2sink 127.0.0.1
#--------------------------------------------------------------
---------------------------------------------------------
The provided interface library automatically sets trapcommunity item
to coincide with the server’s community name.
To start the SNMP service, run the command below:
snmpd –c /var/etc/snmp/snmpd.conf
To test if the SNMP service has been successfully started, run the
command shown below on the remote host.
snmpwalk -v2c -c public 192.168.63.150 .1.3
The snmpwalk command is included in the Net-SNMP package. The
result of this command should indicate the settings of the SDK
environment.
2.6.3 Pro-FTPD
The Pro-FTPD FTP server has been added in /usr/src directory. This
code has been edited to support 8.3 file naming convention. Please
refer to TM_CFImage.pdf for the modifications done on the said
application to achieve the said requirement.
21