Sony MZ-N10 - Manual (Page 73)

73
Erasing the disc information
1 Insert the disc whose information is to be
erased and verify its contents.
2 Select “Erase?” after step 1.
“Erase OK” appears in the display and the
disc information is erased.
Note
If you try to erase the disc information of a disc
that have never been stored, “No Entry!”
appears in the display for a few seconds.
z
“PERSONAL” appears when the disc with its
setting stored is inserted.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace the
settings for the least used disc among the 20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this case,
store the settings again.