While using group function, Others, While using group function others – Sony MZ-N10 User Manual

Page 88

Advertising
background image

88

While using group function

Others

Symptom

Cause/Remedy

The group
function does not
operate.

• While using a disc without group setting, an attempt was made to

select some group-related menu.
, Use a disc with group setting.

A track cannot be
recorded to a new
group. A new
group cannot be
created.

• This is due to the MiniDisc system limitations. Group information

has been written to the area where the disc name is stored. The disc
name and track names are recorded in the same area, which can
store a maximum of approximately 1,700 characters. If the total
number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group
settings at this time.

Symptom

Cause/Remedy

The recorder does
not work or works
poorly.

• The BUILT-IN BATTERY switch at the rear is turned off.

, Turn the BUILT-IN BATTERY switch on.

• The built-in rechargeable battery is not charged.

, Charge the built-in rechargeable battery.

• The volume is low.

, Turn up the volume.

• No disc is inserted.

, Insert a recorded disc.

• The HOLD function is turned on (“HOLD” appears in the display

when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to

the opposite direction of the arrow

(pages 15, 20)

.

• The lid is not firmly closed.

, Close the lid until it clicks. Then slide OPEN to open the lid.

• Moisture has condensed inside the recorder.

, Take the MD out and leave the recorder in a warm place for

several hours until the moisture evaporates.

• The AC power adaptor is not firmly connected.

, Connect the AC power adaptor firmly to the DC IN 6V jack on

the USB cradle or the dry battery case and to the house current.

• The built-in rechargeable battery or dry battery is weak (“LOW

BATT” flashes or nothing appears).
, Charge the built-in rechargeable battery or replace the dry

battery with a new one (page 18), or use the supplied AC
power adaptor.

• The dry battery have been inserted incorrectly.

, Insert the battery correctly (page 19).

Advertising