Woodstock SHOP FOX W1755 - Manual (Page 20)

-18-
W1755 6" Parallelogram Jointer
SE
TU
P
Complete this process once you have familiarized yourself
with all instructions in this manual.
To test run the jointer, do these steps:
1. Read the entire owner's manual first to make sure
you are familiar with the safety and operation con-
trols of this machine!
2. Make sure all tools and foreign objects have been
removed from the machine.
3. Review Page 9 and connect your machine to the
power source.
4. Lift the OFF paddle on the switch and press the red
STOP button in all the way to make sure the switch
is reset.
5. Turn the jointer ON.
— The jointer should run smoothly with little or no
vibration.
— Immediately turn the jointer OFF if you suspect
any problems, and refer to Page 42 to trouble-
shoot/fix any problems before starting the jointer
again. If the source of an unusual noise or vibra-
tion is not readily apparent, contact our technical
support for help at (360) 734-3482 or contact us
online at [email protected].
6. Press the STOP paddle to turn the jointer OFF.
Test Run
Projectiles thrown from the machine
could cause serious eye injury. Wear
safety glasses during assembly and
operation.
Loose hair and clothing could get
caught in machinery and cause serious
personal injury. Keep loose clothing
rolled up and long hair tied up and
away from machinery.