Sprint Nextel 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting - Manual (Page 16)

16 Telephone Operation
When the person at the base answers, press
TALK . The call is released from hold and
transferred to the base.
To transfer a call from the base to the hand-
set, press
INTCM/PAGE . The call is put on
hold, and Paging and Hold appear. When
the person with the handset answers, press
SPEAKER . The call is released from hold and
transferred to the handset.
MEMORY DIALING
You can store up to 30 phone numbers in
memory (20 in the handset’s and 10 in the
base’s memory), then dial a stored number
by entering its memory location number.
You can also store a name with each number
in the handset’s memory.
Use the supplied memory sticker to record
the numbers you stored in the base’s memo-
ry. Peel the backing from the sticker and at-
tach the sticker to the base.
Storing a Number in the Handset's
Memory
Notes:
• The phone beeps five times exits the
storing process if you wait more than 20
seconds between each keypress.
• If you receive a call during memory
entry, the phone exits the storing pro-
cess.
1. Lift the handset.
2. Hold down MEM until Memory Store
and a list of memory location numbers
appear.
3. Press a number (01-20 ) or VOL/CID
8 8 8 8
or
9# 9# 9# 9#
to choose a two-digit memory loca-
tion. Precede a single digit location num-
ber with 0 — 01, 02, 03, and so on.
4. To store a name, press SELECT/CHAN-
NEL . Store Name appears.
If you do not want to enter a name, skip
to Step 6.
5. To enter a name, press VOL/CID
8 8 8 8
or
9 9 9 9
to select the characters and
6 6 6 6
or
7 7 7 7
to move the cursor.
Repeatedly press VOL/CID
9 9 9 9
to view
the characters in alphabetical order.
(The display shows uppercase letters
first, then lowercase letters, numbers,
and special characters.)
Notes:
• Press VOL/CID
8 8 8 8
to see the charac-
ters in reverse alphabetical order.
• You can hold down VOL/CID
8 8 8 8
or
9 9 9 9
to scroll rapidly through the charac-
ters.
• If you make a mistake, move the cur-
sor over the error, then enter the cor-
rect character, or press
INTCM/DEL to
delete a character. To delete all the
characters, hold down
INTCM/DEL for
at least 1 second.
6. Press SELECT/CHANNEL . Store Num-
ber appears.
7. Enter the phone number and any tone or
pause entries (see “Using Tone Services
on a Pulse Line” on Page 15 and “Enter-
ing a Pause” on Page 17).
8. Press SELECT/CHANNEL . The phone
beeps and Memory nn Stored
appear (nn is the location number you
selected). After 2 seconds,
Memory
Store appears. Repeat Steps 3–8 to
store more numbers.
9. When you finish, press MEM .
43-5522.fm Page 16 Tuesday, September 12, 2000 3:12 PM