Sprint Nextel 2.4 GHz Digital Spread Spectrum Dual Keypad Cordless Phone with Caller ID/Call Waiting - Manual (Page 22)

22 Troubleshooting
4. Press TALK . The selected service num-
ber appears and is dialed.
Note: You can display the programmed ser-
vice number of each calling feature. At Step
2 above, press
7 7 7 7
to view the number and
6 6 6 6
to return to the name display.
Editing Advanced Service Names
and Numbers
You might need to change the number
stored in any of the three service locations,
for example, if your phone company uses dif-
ferent number sequences from the pro-
grammed ones.
Follow these steps to edit a key sequence.
1. Lift the handset.
2. Hold down MENU until Select to
Edit and a list of calling features
appears.
3. Choose a calling feature by pressing a
number ( 1 – 3 ) or VOL/CID
8 8 8 8
or
9 9 9 9
.
4. Press SELECT/CHANNEL . A menu listing
Edit , Restore , and Go Back
appears. Press VOL/CID
8 8 8 8
or
9 9 9 9
to
highlight the desired option then press
SELECT/CHANNEL to choose it.
Edit — Service name appears.
Edit the service name and press
SELECT/CHANNEL . Then, Service
number appears. Edit the number and
press SELECT/CHANNEL . Enter the
name and number as described in Steps
5 through 8 of “Storing a Number in the
Handset's Memory” on Page 16.
Restore — prompts you to confirm
the restoration. If you want to return to a
preprogrammed calling feature, press
VOL/CID
8 8 8 8
to move the cursor to Yes ,
then press SELECT/CHANNEL . The
phone beeps, and Service Setting
Restored appears.
Go Back — returns you to the list of
service numbers.
ˆ
Troubleshooting
We do not expect you to have any problems with your phone, but if you do, these suggestions
might help.
Problem Suggestion
The phone does not work prop-
erly. Be sure the base's phone line cord and AC adapter are correctly and
securely connected.
Be sure the battery pack in the handset is connected and charged.
Return the handset to the base for about 5 seconds to reset the secu-
rity access-protection code.
The display flashes slowly
when the handset is faceup on
the base. Make sure the battery pack in the handset is properly connected.
43-5522.fm Page 22 Tuesday, September 12, 2000 3:12 PM