Scotts S2048 - Manual (Page 63)

Service Electrical - Page 59
SERVICE ELECTRICAL
Replacing Headlight Bulb
1. Lift hood.
2. Push in and turn bulb socket (A) 1/4 turn
counterclockwise to remove.
3. Replace defective bulb(s) with a new bulb.
4. Insert bulb socket into housing, push in and turn 1/4
turn clockwise to install.
5. Lower hood.
Replacing Battery Discharge and Oil
Pressure Indicator Light Bulbs
NOTE: If more than one bulb is defective, replace
only one bulb at a time. Make sure light socket is
installed in correct holder.
1. Lift hood.
Picture Note: Model S2554 used for photo purposes.
2. Turn indicator bulb socket(s) (A) 1/8 turn
counterclockwise to remove it.
3. Pull bulb(s) from socket(s).
4. Push new bulb(s) into socket(s) and install socket(s)
into holder.
5. Lower hood.
M88559
A
M88597
A