Scotts S2048 - Manual (Page 71)

Removing Mower - Page 67
REMOVING MOWER
Removing Mower
1. STOP engine, LOCK park brake, push PTO switch
down to DISENGAGE, turn key to the OFF position, and
remove key.
2. Raise mower lift lever to TRANSPORT (upper)
position.
3. Set cutting height knob (A) to 25 mm (1 in.).
4. Put wood blocks under each side of mower.
5. Lower mower to MOWING (lower) position, bring
deck down onto blocks.
Picture Note: 48-Inch Deck used for photo purposes.
6. Release drive belt tension rod (B) from bracket (C).
7. Remove belt from engine drive sheave (D).
c
CAUTION: Avoid injury.
Before removing mower from machine: STOP
engine. Remove key. Wait for all moving parts
to STOP.
Avoid injury from loaded spring: LOCK lift
lever before removing mower.
Avoid injury from spring loaded rod: Make
sure you have a tight grip on drive belt
tension rod and release slowly.
M97170
A
M97161
D
B
C