SanDisk Wireless LAN Card - Manual (Page 24)

Page 20
Key Setting
1. Select one key from the four Key Settings.
2. Tap Apply to assign the key setting.
To create encryption keys manually:
1. Tap the WEP Key Type menu to pull down the key type list.
2. Tap Char or Hex.
3. In the Key in… field, tap in a character or hexadecimal string in the field.
4. Tap OK.
5. Select one key from the four Key Settings.
6. Tap Apply to assign the key setting.
Character and Hexadecimal Ranges for 40-bit Encryption
5 characters in the range of A-Z, a-z, and 0-9
for example: MyKey
10 digit hexadecimal values in the range of A-F, a-f, and 0-9.
for example: 11AA22BB33.
Character and Hexadecimal Ranges for 128-bit Encryption
13 characters in the range of A-Z, a-z, and 0-9
for example: MyKey12345678
26 digit hexadecimal values in the range of A-F, a-f, and 0-9.
for example: 11AA22BB33CAT456FENCE92647.
Authentication Type
The Authentication Type can be set to Open System or Shared Key.
The default Authentication Type is Open System. Open system
indicates no encryption.
When the Authentication Type is set to Shared Key, WEP keys must be
used. The Pocket PC and the access point must use the same WEP
encryption key for Shared Key encryption.