Sharp VL-NZ50U - Manual (Page 7)

vi
Inserting a Cassette
1
Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
• After confirmation sound, the cassette
holder extends and opens automatically.
2
Insert a commercially available cassette
fully with the window facing outwards,
and with the erasure protect tab facing
upwards.
3
Press the W mark gently until the
cassette holder clicks into place.
• After confirmation sound, the cassette
holder retracts automatically.
4
Wait for the cassette holder to fully
retract. Close the compartment door by
pressing the center until it clicks into
place.
SA VE
RE C
Tips on Recording
Positions
To create images that are easy to watch during
playback, try to record with an upright posture
and steady hand to prevent a shaky image.
Holding the camcorder
Place your right thumb close to the REC
START/STOP button and Power Zoom control.
Place your left thumb on the thumb rest on the
left side of the screen.
Basic posture
Shooting from a high angle
Shooting from a low angle
Cassette compartment
door release
Erasure protect tab
“W” mark
Place your elbows
against your sides.
Balance your
weight on both
legs.
Take care not to
cover the lens or
microphone with
your finger.
Turn the LCD monitor so that the
screen faces downward.
Turn the LCD monitor so that
the screen faces upward.
VL-NZ50U-*i-xii 02.2.12, 5:18 PM 6