Sharp VL-NZ50U - Manual (Page 8)

vii
Quick Operation Guide
Easy Camera Recording
1
Insert a cassette into the camcorder.
2
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens now displays.
3
Press the REC START/STOP button to
begin recording.
To pause recording
Press the REC START/STOP button again.
A U T O
RE C
Zooming
Push the Power Zoom control to T (1) (tele-
photo) or W (2) (wide angle) side.
Playback
1
Hold down the Lock button
and set the Power switch to
VCR.
2
Press j (or k) on the Operation button
to rewind (or fast forward) the tape to the
desired point.
3
Press m to begin playback.
To stop playback
Press l.
Volume Control
Push the Volume control to the L or + side to
increase (1) or decrease (2) the volume.
Power switch
REC START/STOP button
Power Zoom control/Volume control
Operation button
Power Zoom control
Volume control
Lock button
Lock button
VL-NZ50U-*i-xii 02.2.12, 5:18 PM 7