Sinclair Mambo Surface Prep - Manual (Page 3)

1.0 Technical data/technical description
Power supply 110V 50 Hz
Power consumption 2300W
No-load speed 100 – 400 Strokes/min
Sound pressure level 56 dB(A)
Sound energy level 69 dB(A)
Hand/Arm-Vibration < 4,5 m/s²
Weight 155 lbs
Comes with:
Mambo Surface Prep, safety goggles and tool kit.
2.0 Safety
The Sinclair Mambo Surface Prep is state of the art designed and meets all
standard safety requirements.
3.0 Safety Instructions
Disconnect the power supply before any maintenance is carried out. Use only recommended
mounting discs and brushes. The mounting discs must have a plain surface. Use only genuine
Sinclair discs and brushes. Other parts could affect the safety of the machine.
Always use the safety – and suction ring.
Otherwise parts of the sub-floor may be
cast out and endanger other persons.
Always lock the additional weight with the
screw nuts. Use only the genuine Sinclair
weight. DO NOT USE ANY OTHER
WEIGHTS!
Maintenance should be undertaken only by
qualified personnel. Use only genuine
Sinclair parts.
Use only appropriate detergent liquids.
Check the power cord and the plug before
starting. Both of them must be in perfect
condition, the insulation must not be damaged.
Have damaged insulation repaired at once,
before starting the machine.
Otherwise this may result in considerable
danger to the user.
Speed Control
3