Southwestern Bell 26955 - Manual (Page 30)

30
S
ETTING A
N
EW
S
ECURITY
C
ODE FROM THE
C
ORDLESS
H
ANDSET
1. Place the cordless handset close
to the base unit.
2. On the cordless handset, press
and hold the 2 and 8 keys
simultaneously for at least 2
seconds.
SET SECURITY is
displayed.
3. On the base unit, press and hold
the MUTE and HOLD buttons
simultaneously for at least 2
seconds. The MUTE and HOLD
indicators blink and
SET
SECURITY is displayed again.
• If the transmission is successful,
the cordless handset will beep in
confirmation.
• If the transmission is not
successful, the transmission will
time out after 30 seconds and a
3-beep error tone will sound. (If
this happens, move the cordless
handset closer to the base unit
and try again.)