Southwestern Bell 26955 - Manual (Page 8)

8
D
ESKTOP
I
NSTALLATION
1. Make sure the mounting bracket is securely fastened.
2. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don’t know which type of service you have,
check with the phone company.
3. Set the RINGER switch on the base to HI.
4. Plug the coiled cord into the corded handset and the base.
5. Place the corded handset in the base.
6. Plug the power supply cord into the base and the other end into an AC
power outlet.
7. Plug the long telephone line cord into the PHONE LINE jack on the back
of the unit. Plug the other end into a modular phone jack.
8. Raise the base antenna.
CAUTION: Use only the Thomson 5-2471 power supply that came with this
unit. Using other power supplies may damage the unit.
(Installation continued on the following page.)
I
NSTALLATION
TONE/PULSE switch
5
4
1
2
7
6
8
3