SMC Networks SMC2555W-AG - Manual (Page 138)

Command Line Interface
6-14
reset
This command restarts the system or restores the factory default
settings.
Syntax
reset <board | configuration>
• board - Reboots the system.
• configuration - Resets the configuration settings to the
factory defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On
Self-Test.
Example
This example shows how to reset the system:
show history
This command shows the contents of the command history
buffer.
Default Setting
None
Command Mode
Exec
SMC-AP#reset board
Reboot system now? <y/n>: y