System configuration 5-32 – SMC Networks SMC2555W-AG User Manual

Page 88

Text mode
Original mode

Advertising

System Configuration

5-32

CLI Commands for Downloading Software from a TFTP Server –
Use the copy tftp file command from the Exec mode and then
specify the file type, name, and IP address of the TFTP server.
When the download is complete, the dir command can be used
to check that the new file is present in the access point file
system. To run the new software, use the reset board command
to reboot the access point.

SMC-AP#copy tftp file

6-42

1. Application image

2. Config file

3. Boot block image

Select the type of download<1,2,3>: [1]:1

TFTP Source file name:smc-img.bin

TFTP Server IP:192.168.1.19

SMC-AP#dir

6-44

File Name Type File Size

-------------------------- ---- -----------