SIIG 04-0600B - Manual (Page 3)

3
Installation
Please read the instructions prior to installation. This speaker
mount is designed solely for the mounting of small speakers
weighing less than 8lbs. We are not responsible for damage
that may occur if speakers weighing more than 8lbs. are
used.
The user will have to determine which type of configuration
will work best with the included mounting hardware. If the
included hardware does not fit with the application, the
appropriate hardware will have to be purchased.
Single Hole Mounting
1. Most satellite speakers will require the use of the
M5 x 20mm machine screw used in combination with
M5 x 1/8" plastic washer. The plastic washer is used as
a spacer between the threaded insert and the post, see
Figure 1 below. It is critical the plastic washer is used
correctly.
M5 x 20mm
Machine Screw
Mounting Post
M5 x 1/8"
Plastic Washer
Back Speaker
Figure 1