Sanyo PLC-EF60 - Manual (Page 42)

42
Computer Adjustment
Press the MENU button to display On-Screen Menu. Spin
the menu icons with the Control pad and press the SELECT
button when the PC ADJ. icon comes right in front. 1
2
Move the yellow
frame pointer to an
item and press the
SELECT button.
PC Adjust Menu
Adjust value with
the Control pad.
Some computers employ special signal formats which may not be
tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to
match those signal formats. The projector has 50 independent
memory areas to memorize those parameters adjusted manually.
It allows you to recall the setting for a specific computer easily.
Eliminates flicker from the image displayed. Adjust value with
the Control pad. (From 0 to 31)
Fine sync
Adjusts the number of total dots in one horizontal period.
Adjust number to match your PC image with the Control pad.
Total dots
Press the SELECT button to show H-Freq. and V-Freq. of the
connected computer.
Current mode
Adjusts clamp level (Phase and Width). When the image has
dark bars, try this adjustment.
Clamp
Adjusts the resolution at the Display area dialog box.
Horizontal
Adjusts the horizontal area displayed by this projector.
Decrease or increase value with the Control pad.
Vertical
Adjusts the vertical area displayed by this projector.
Decrease or increase value with the Control pad.
Display area
Press the SELECT button at
the Current mode to show
the information of the
connected computer.
Current mode
Manual PC Adjust
Move the yellow frame pointer with the Control pad to an
item which you want to select.
Press the SELECT button to display an adjustment dialog
box. Adjust value with the Control pad. 3