Sanyo PLC-EF60 - Manual (Page 60)

60
Special
Auto PC adj.
Select "On" to enable the Auto PC adjust function and "Off" to
disable it. Refer to page 31 and 41 for Auto PC adjust function.
Test pattern
Various test patterns are prepared in this projector allowing users
to test the projection. Select one from the following twenty kinds
of patterns: Cross 1 (W), Cross 2 (R), Cross 3 (G), Cross 4 (B),
Cross 5 (M), Cross 6 (C), Cross 7 (Y), Gradation 1~4, Color, and
Flat 1~8.
To cancel the Test pattern, press the CANCEL button on the top
control or the remote control.
Select Test pattern and
then the Test pattern
selection box is displayed.
Choose one of these
patterns with the Control
pad and press the SELECT
button to display the
selected pattern on screen.
Test pattern
Indicates the other items
exist below.
RS-232C
This feature allows users to set serial communication
configuration (baud rate and the projector ID) when connecting
several projectors via the RS-232C terminal of the projector. (p13,
80)
Baud rate . . . . .9600 / 19200
Projector ID . . .001 ~ 999
✽
Default . . . . .returns Baud rate and Projector ID to factory
default setting
(Baudrate: 19200, Projector ID: 001)
USB memory
This feature allows users to store PC mode and Image adjustment
data on the optional USB key connected to the projector and recall
it from the USB key. PC mode data and Image adjustment data
can be stored separately on respective 10 memory areas of the
USB key. (PC mode data: mode 1–50 x 10, Image adjustment
data: Image 1-10 x 10) (p43, 47)
Save . . . . . .stores the adjustment data on the USB key
connected to the projector.
Load . . . . . . . . .recalls the stored data.
Delete . . . . . . .deletes the stored data.
To use the USB memory function, the optional USB key
(separately provided) is required. Refer to p75 for the USB key
information and contact the sales dealer or service station for
purchasing. Refer to the owner's manual enclosed with the USB
key for further information on USB memory function.
RS-232C
USB memory
✔
Note:
• USB memory function cannot be operated without our specified optional USB key.
See page 75 for the optional parts.
• USB memory cannot be displayed without the optional USB key connected to the
projector. (p13)
The item selected.
Move the pointer to one of
these and then press the
SELECT button and USB
Memory Menu appears .
To be continued to the next page.