Sanyo PLC-EF60 - Manual (Page 10)

10
Preparation
q w e r t y u
q LAMP1 REPLACE indicator
Turns orange when the life of the projection lamp1
draws to an end. (p64, 69)
w WARNING TEMP indicator
Blinks red when the internal temperature of the
projector is abnormally high. (p62,67)
t READY indicator
Lights green when the projector is ready to be turned on
and it remains green lighting while the projector is under
operation.
Blinks green in Power Management mode or when the
projector is shutdown due to power failure.
Indicators
r LAMP indicator
Lights red when the projector is in the stand-by mode,
and turns dim lighting when the projector is turned on.
(p67)
e WARNING FILTER indicator
Lights orange when the projector's filter is clogged with
dust. (p63, 68)
u LAMP2 REPLACE indicator
Turns orange when the life of the projection lamp2
draws to an end. (p64, 69)
y SHUTTER indicator
Lights blue when the shutter is released. (p68)
Press here to open the
Top Lid and then top
controls appear. (See next
page.)