Sanyo PLC-EF60 - Manual (Page 26)

26
Operating the Projector
You can operate the projector with the projector's top control, the remote control or a USB mouse (not provided). The
remote control is available as wireless and wired.
Operational range of the wireless remote control is within about 32.8' (10m) from the projector. Operational range differs
depending on environments where the projector is used. Any obstruction to air signal between the projector and the
remote control may prevent the remote control from working properly.
The wireless remote control does not work
when the remote control cable is
connected to either the projector or the
remote control. Remove the remote
control cable from both of the projector and
the remote control when using it as
wireless.
Wireless Remote Control Operation
Projector Top Control Operation
Mouse Operation
Connect the R/C JACK on the projector and the remote
control with the remote control cable when operating
the remote control as wired.
Connect the USB terminal on the projector and a USB
mouse when operating the projector's menu with the
USB mouse. A mouse cursor will appear on the
screen with the mouse connected.
Mouse operation offers the On-Screen Menu control
only. Other operations are unavailable with the USB
mouse. For details of the mouse operation, refer to
page 34~35.
Wired Remote Control Operation
R/C jack
Remote control
cable
USB terminal
Basic Operation