Sony SXRD 4K - Manual (Page 26)


SPECIFICATIONS
Dimensions
Unit: mm (inches)
In-room, Large-venue Projectorss
VPL-FH300L VPL-FW300L
Optical
Projection system 3 LCD panels, 1 lens projection system
LCD panel 1.2-inch 2K x 1K panel, 1.2-inch WXGA panel,
6,635,520 (2048 x 1080 x 3) pixels 3,278,400 (1366 x 800 x 3) pixels
Projection lens Not supplied, refer to "Table of Available Lenses"
Lamp 275 W ultra high pressure lamp x 2
Light output 6000 lumens (lamp mode high) 7000 lumens (lamp mode high)
(with VPLL-Z4019) 4800 lumens (lamp mode standard) 5600 lumens (lamp mode standard)
Screen coverage 40 to 600 inches (with lenses except VPLL-Z5045), 60 to 600 inches (with VPLL-Z4045) (viewable area measured diagonally)
Signals
Color system
NTSC 3.58 , PAL, SECAM, NTSC 4.43 , PAL-M, PAL-N, PAL60 (automatically/manually selected)
Resolution Video: 750 TV lines, RGB: 2048 x 1080 pixels Video: 750 TV lines, RGB: 1366 x 800 pixels
Acceptable computer signals fH: 19 to 92 kHz, fV: 24 to 92 Hz
Maximum input signal resolution (analog): up to UXGA (fV 60 Hz), Maximum input signal resolution (digital): up to 2K x 1K (fV: 24 Hz)*
Acceptable video signals 15 kHz RGB/Component 50/60 Hz, Progressive Component 50/60 Hz,
DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/30p, 1080/60p, 1080/50p), Composite Video, Y/C Video
General
Dimensions (W x H x D)
699 x 298 x 785 mm (27 5 / 8 x 11 3 / 4 x 31 inches) (including projection parts)
Mass Approx. 30.5 kg (67 lb 4 oz) (excluding the optional lens)
Power requirements AC 100 to 240 V, 8.2 to 3.4 A, 50/60 Hz
Power consumption Max. 820 W, standby: 30 W (standard mode)/0.5 W (low mode)
Operating temperature 0 to 35 °C (32 to 95 °F)
Operating humidity 35 to 85% (no condensation)
Storage temperature -20 to 60 °C (-4 to 140 °F)
Storage humidity 10 to 90%
Inputs/Outputs
Video In Video Composite video, BNC
S Video Y/C, mini DIN 4-pin
Video Out Video Composite video, BNC (Loop-through output)
S Video Y/C, mini DIN 4-pin (Loop-through output)
Input A Analog RGB HD D-sub 15-pin (female)
Input B Analog RGB HD D-sub 15-pin (female)
Input C Analog RGB/Component BNC x 5
Input D Digital RGB/Component HDMI (HDCP)
Input E Open for optional boards
Input F Network 10BASE-T/100BASE-TX : RJ45
Output ** Monitor (Analog RGB) HD D-sub 15-pin (female)
Remote RS-232C D-sub 9-pin (female)
Control S IN Stereo mini jack (plug-in-power)
Supplied accessories
Remote Commander Unit (1), Size AA (R6) batteries (2) for Remote Commander, Lens hole cover (1), Security label (1), CD-ROM (Operating instructions, Application software) (1),
Quick reference manual (1), Safety regulations (1), Dust cover (1), AC connector cover (1), HDMI connector cover (1), AC power cord (1)
* When a 2K x 1K (2048 x 1080) signal is input, information of a vertical one line at both ends is not displayed. The signal being displayed is not native, 2K x 1K equivalent.
** RGB signals can be output from input A, input B, and input C connectors.


  


  


  




   

  



  


  


  


  


  


  


  


• Halogenated flame retardants are not used in cabinets or printed wiring boards.
• Standby power consumption: 0.5 W