Sanyo RL7300 - Manual (Page 141)

ⅷ Outgoing Calls shows the last 10 different PCS Ready Link calls you
placed.
ⅷ Incoming Calls shows the last 10 different PCS Ready Link calls you
accepted.
ⅷ Missed Calls shows the last 10 PCS Ready Link calls you missed.
Tip: You can also select Enter R-Link# from Go to option to enter a PCS Ready Link
number directly. See page 132 for details.
Note: The icon next to the group name indicates a group.
Making a PCS Ready Link Call (1-to-1 Call)
You can place a 1-to-1 PCS Ready Link call by entering a PCS Ready
Link number or by selecting a contact from the PCS Ready Link List.
To place a PCS Ready Link call by selecting a contact:
1. Press R-Link (left softkey) or press to access the PCS Ready
Link List.
2. Press Go to (left softkey), highlight the list from which you want
to place a call (Company List, Personal List, Outgoing Calls,
Incoming Calls, or Missed Calls), and press
.
3. Highlight the contact you want to call, and press and hold
to place the call and get the floor. (You will see R-Link calling...
and Connecting... followed by “You have floor.” You can now
begin speaking.)
– or –
Highlight the contact you want to call and press and release
to place the call. (The call will connect as described
above, but “Floor is open.” will appear on the screen and either
you or your contact may press and hold
to take the floor
and speak.)
Ⅲ To see an entry’s information, press during step 3 above.
Note: During a PCS Ready Link call, the “ floor ” is the right to speak. When you see
“ Floor is open. ,” the first person to press the Ready Link (Memo) button ( ) can
speak (while holding the button). Only the person who has the floor can speak.
The phone beeps if you press the Ready Link (Memo) button when another
contact has the floor.
Section 2J: Using PCS Ready Link 130