Sanyo RL7300 - Manual (Page 29)

Important: To maximize performance when using your PCS Phone, extend the
antenna before a call and do not touch the antenna during a call (see page 199).
To place a call with the Flip Closed:
1. Make sure your phone is on.
2. Press and hold the Side Call key ( ) on the right side of the
phone. (You will see a message on the Sub LCD.)
3. Follow the system prompts. (The call will be made in
speakerphone mode, unless you have a headset attached to the
phone.)
Ⅲ Redial to redial the last number you called.
Ⅲ Voice Dial to use the Voice Dial function (see “Using Voice-
Activated Dialing” on page 119).
4. When you’re finished, press and hold .
Note: To use a Voice Dial, you must have stored Voice Dial entries (see
“Programming Voice Dial Tags” on page 119).
Correct Incorrect
Section 2A: Your PCS Vision Phone – The Basics 18