Sanyo RL7300 - Manual (Page 73)

Using Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive incoming calls or
make calls to 911, PCS Customer Solutions, or special numbers.
To lock your phone:
1. From the Security menu (see “Accessing the Security Menu” on
the previous page), select Lock Phone and press
.
2. Highlight Lock Now or On Power-up and press .
3. Depending on your preference, highlight either Full Lock or
Excp. Incom.Calls and press
.
Ⅲ Full Lock: No phone calls can be made, except for
Emergency number,
(PCS Customer Solutions),
or special numbers. No phone calls can be received except
for special numbers.
Ⅲ Excp. Incom.Calls: No phone calls can be made, except for
Emergency number,
(PCS Customer Solutions),
or special numbers, but all incoming calls can be received.
Tip: If you want to cancel the “On Power-up” setting before turning the phone off,
select Unlocked during step 2 above.
Unlocking Your Phone
To unlock your phone:
1. Press Unlock (left softkey).
2. Enter your lock code. (Your phone will unlock and return to
standby mode.)
Changing the Lock Code
To change your lock code:
1. From the Security Menu display (see “Accessing the Security
Menu” on the previous page), select Others and press
.
2. Select Change Lock and press .
3. Enter a new lock code, (“1234” for example) under New Code.
4. Reenter the new code under Reenter Code.
Section 2C: Setting Your Phone’s Security 62