Sony STR-DA2ES - Manual (Page 20)

20 GB
4: Connecting the AC
power cord
* Except for models of area code KR.
The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
Notes
• The AC OUTLET(s) on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory
defaults.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
“ENTER to Clear All” appears in the
display.
3
Press DOOR OPEN to open the door of
the front panel, then press ENTER.
After “MEMORY CLEARING...” appears
in the display for a while, “MEMORY
CLEARED!” appears.
The following are reset to their factory
settings.
• All settings in the SET UP,
CUSTOMIZE, SURROUND, LEVEL,
and EQ menus.
• The sound field memorized for each
function and preset station.
• All preset stations.
• All index names for functions and
preset stations.
SUB
WOOFER
AC OUTLET
IMPEDANCE USE 4-16 Ω
L
R
– +
FRONT B
PRE OUT SPEAKERS
FRONT CENTER SURROUND
SURROUND
BACK
OUT
R
L
IMPEDANCE
SELECTOR
4 Ω 8 Ω
AC OUTLET
*
b
AC power cord
To a wall outlet