Sharp MD-X60H - Manual (Page 30)

<P=004>
(Continued)
■ Recording from the built-in radio onto a MiniDisc
1
Tune in to the desired station. (pages 12 - 13.)
2
Load a recordable MiniDisc.
3
Check the recording mode by pressing the REC MODE button.
4
Press the MD ● REC button.
● The unit will enter the recording stand-by mode.
At this time, auto tuning is impossible.
MD
MD
4
6
3
5
4
5
6
3
2
Note:
● Before recording an AM broadcast, enter the recording stand-by mode, and then
separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast
can be tuned in most clearly.
5
Check the recordable time by pressing the DISPLAY button.
6
Press the MD 0 6 button.
● During recording, you cannot change the station.
To stop recording:
Press the MD ■ button.
After the track number has been written on the MiniDisc, the recording will stop.
To interrupt recording:
Press the MD 0 6 button whilst recording.
Press the MD 0 6 button again to resume recording. The track number will in-
crease.
To record the track number whilst recording:
The recording is performed as a single track.
To identify different sections of a recording you can increase
the track number at any point during the recording process.
To create a new track number, whilst in the recording mode,
press the MD
● REC button.
● The track number will increase by one, and then the rec-
ording will continue.
■ Recording from a cassette onto a MiniDisc
(MD Synchronised Recording System)
When a tape is played, the MD recording will start simultaneously.
1
Load a cassette for playback.
2
Load a recordable MiniDisc.
3
Check the playback direction by pressing the REVERSE MODE but-
ton.
4
Select the DOLBY NR mode.
● When recording with the Dolby NR system, turn on the G indicator.
5
Check the recording mode by pressing the REC MODE button.
6
Check the recordable time by pressing the DISPLAY button.
7
Press the MD ● REC button.
● The unit will enter the recording stand-by mode.
8
Press the TAPE 0 button.
● Recording will begin.
To stop recording:
Press the TAPE ■ button after pressing the MD ■ button.
To interrupt recording:
Press the MD 0 6 button whilst recording.
Press the MD 0 6 button again to resume recording. The track number
will increase.
■ Recording from a cassette onto a MiniDisc
(One-Touch Editing)
The contents of a tape recording can be recorded onto an MD with a
one-touch operation.
1
Load a cassette for playback.
2
Load a recordable MiniDisc.
3
Check the playback direction by pressing the REVERSE MODE but-
ton.
4
Select the DOLBY NR mode.
● When recording with the Dolby NR system, turn on the G indicator.
5
Check the recording mode by pressing the REC MODE button.
6
Check the recordable time by pressing the DISPLAY button.
7
Press the TAPE 0 MD button.
● Recording will begin.
To stop recording:
Press the MD ■ or TAPE ■ button.
What is the space-cut function?
If there is a silence in the playback signal that lasts 3 seconds during
a synchro recording, the recording will stop automatically and unit will
enter the recording stand-by mode. Then, when sound from the play-
back unit resumes, recording will automatically restart.
(A space of 3 seconds is placed between tracks.)
● If there is noise between tracks of the sound source, the synchro
recording or the space-cut function may not work properly.
If this happens, make the recording manually.
● When you need to record tracks or audio that include very quiet
passages lasting 3 seconds or more, manual recording is recom-
mended.
Auto Mark function
If there is 1 second or more of silence, a new track number is created
automatically.
MD-X60H(SUK) TINSE0227AWZZ
29